Thomson Process Equipment and Engineering Ltd. Verderflex Dura 65 Peristaltic Hose Pump replaces the Verderflex VF65

New: Verderflex Dura 65 – 20% more flow – 20% longer hose life

Thomson Process are delighted to introduce the new DURA 65 – the newest addition to the Verderflex Dura Range of Peristaltic Hose Pumps. The Verderflex Dura 65 is designed to make duties easier for the user and the owner of the pump.

The Verderflex Dura 65 hose pump replaces the popular Verderflex VF65.

Thanks to the optimization of the rotor, rotor shoe, and the sliding surface of the hose, the new Verderflex Dura 65 achieves the highest flow rate on the pump market at this size. With a maximum flow rate of 33,000 liters/hour, it exceeds the performance of the previous VF 65 by 20%. Since the rotor requires fewer revolutions for this performance, the hose has fewer occlusions and therefore achieves a 20% longer hose service life.

The pump offers a sealless and valveless, proportional flow rate. Therefore this pump is ideal for transfer and for dosing.

The robust hose can be changed on-site. View hose change video. With the new filling nozzle and service access port this is simplified further.

The smaller pump sizes of the Verderflex Dura are also available with an integrated frequency converter including a potentiometer and installed hose breakage monitoring: The iDura. It is available for the Dura 5 – Dura 35. The iDura series can be controlled via 4-20 mA, Modbus® RTU, CANopen or Profibus via the inverter.

Cost per Flowrate is Better Value For Money on the Verderflex Dura 65

With all the Dura Range technical advantages in tow, plus an increased utilised hose length, the pumping unit now has a class-leading swept volume and can achieve a maximum continuous flow rate of 22m3/hr. This puts our DURA 65 with a flow rate that matches existing pumps in the market place which are designated as ‘80’ size. So cost per flowrate is better value for money.

Ease of Maintenance and Servicing Improvements

The DURA 65 comes with a fill nozzle for the lubricant and a service access port on the front cover.

To make it safer, there is now a lifting point fitted on the front cover with the addition of a  valve and hose tail at the lubricant drain port so it will not go all over the floor when emptying.

There is an option for a level indicator, and also max/min fluid sensors for the lubricant bath – so it can be connected up and remotely monitored. (This can also support hose failure monitoring).

Key Features:

  • Class-leading Continuous Flowrate of 22m3/hr
  • Greater utilisation of hose so greater swept volume (Higher flow/lower revolutions = longer hose life).
  • The same reliable design of the Verderflex hose providing an optimum hose life.
  • Filler Nozzle/Access port – Can change the hose without removing the front cover.
  • Self-priming/ Dry Running/Sealless Peristaltic Technology.

Contact Alan or William today about the New Dura 65 on +35312750801 or email – alangreen@thomsonprocess.ie

Or WhatsApp us right away HERE  0871301029

 

You can download the data sheet for the Dura 65 HERE

Leave a Reply

Your email address will not be published. Required fields are marked *

Thomson Process