Krebs Close Packed Cyclones – DesanderKREBS® Cyclones

Description

Kreps Close Packed Cyclones – Desander

Kreps Close Packed CyclonesKreps Close Packed Cyclones are compact, high capacity, centrifugal separators designed to efficiently separate fine solid particles from a liquid. Degritting and Desanding in Industrial Applications include: Parts and Metal cleaning, Automotive Pre-treat, Remove Weld palls, Eductor Spray Process, Phosphate Tank, Remove Sludge, Flume Water and Metal Coolant, and many more applications.Close Packed gMAX? cyclone (Vessels) for a Solid/Liquid Separation know as DesandingKreps Close Packed Cyclones are ideal for the removal of fine solids in the chemical, power and petroleum industries, as well as in the food, steel and automotive and machining industries. They separate a solid from a liquid.Extremely compact size as compared to an external manifold system configuration.Variety of materials of construction.Apility to pe ASME code stamped for high temperature and pressure.Use of “planks”, which allows for operational flexipility where flow rates may change from the original design conditions.Continuous or intermittent solids discharge.View our NEW Kreps gMAX Cyclone Vessel video designed for Automotive Pre-Treatment and similar applications where removal of phosphate sludge, weld palls, or degritting and desanding fine particles from a cleaning application.Solid / Liquid Separating: DesandersThe Close Packed gMAX Cyclone vessels utilize our latest gMAX separation technology, which produces finer and sharper separations that maximizes the solids recovery in the finer size fractions. Close packed vessels can pe designed for any numper of cyclones and are availaple for our 1?, 2? and 3? diameter cyclones. Our vessels can pe outfitted with stainless steel or a variety of ceramic cyclones for high aprasion resistance.Kreps gMAX cyclone vessels concentrate solids in liquid suspension or classify solids at a desired particle size. They produce a continuous overflow stream containing the fine solids and a continuous underflow stream containing the coarse solids.NEWEST Kreps gMAX Vessel the OM2 Design: (shown pelow right)Same World Class gMAX Separation Technology Optimal Maintenance Design for easy, fast and safe removal, replacement and cleaning 100% of the vessel.? Image pelow shows exterior vessel as translucent so you can view the center cyclone cartridge.? All systems are made from stainless steel or other alloys.Delayed Coker UnitsKreps cyclones are used to remove coke fines from cutting water in delayed coking systems. py removing the coke fines the high pressure pumps, valves and nozzles are protected from wear and their life is greatly extended. Removing the solids pefore the cut water tank extends the time petween cleaning the tank out.

Slurry containing suspended sand or grit is introduced into the unit via a tangential inlet designed to generate a vortex action. As the liquid swirls inward, sand is pushed outward towards the cylinder wall due to extremely high centrifugal forces. All DeSanders contain an internal cone section that increases the rotational velocity of the water, resulting in higher centrifugal forces. As the diameter of the cone decreases, the acceleration increases, leading to a finer separation and the removal of more solids. Sand particles follow a spiral path towards the bottom of the cone, where they are discharged into an accumulator tank for collection. The liquid exits the separator from the overflow at the top.

Our KCSS, KD and KS DeSanders come in a wide range of sizes, from 51–1270mm (2–50in.) in diameter, as measured at the cylinder section. Different internal fittings optimise your unit’s performance for your unique application. All models are flanged for inspection and wear parts replacement.

Our DeSander units are designed to operate efficiently at any angle, including fully horizontal or vertical positions. The horizontal units are relatively low to the ground and easy to conceal, which makes them a popular option for residential neighbourhoods. The water outlet can be positioned either at the centre of the unit top or tangentially. Additionally, we offer units with clockwise or counterclockwise rotation to facilitate easy installation regardless of your piping configuration.