VA-EP30
- Max Capacity:
30 l/min
- Max Pressure:
5 bar
Description
Description
VA-EP30 Diaphragm Pump
The VA-EP30 Diaphragm Pump electrically driven double diaphragm pump uses a new kind of technology for diaphragm pumps. This pump series works according to a horizontal fluid flow path, which gives a more energy efficient and less friction loss fluid path. A direct result is reduced maintenance, lower energy costs and a longer life time. The pump housing is manufactured from solid machined PTFE or PE (UHMW). The other wetted parts are made from PEEK and SS 316L or Hastelloy C or Duplex SS.
Key Features
- Maximum flow rate: 30 L/min
- Maximum discharge pressure: 5 bar
- Max suction lift (wet): 8.5 m wc
- Max suction lift (dry): 1.6 m wc
- Max particle size: 2 mm
- Temperature range: 70°C
- Max. Temperature PTFE: 95°C
- Suitable for ATEX-certified environments
Materials of Construction
- Wetted parts: UHMW PE, PEEK, PTFE, SS 316L
- Materials flappers: PEEK
- Valve balls: EPDM, PTFE, Stainless Steel
- Diaphragms: Overmolded PTFE
- Centre block: UHMW PE or PTFE
Applications
The VA-EP30 Diaphragm Pump for low capacity dosing and continuous flow applications pumping abrasive and viscous fluids.
Contact Us
For expert advice or to request a quote on the VA-EP30 Diaphragm Pump, please contact us. Our team is ready to help you choose the perfect pump for your needs.
Features
| Properties | |
|---|---|
| Max. flow | 30 l/min |
| Max. discharge pressure | 5 bar |
| Max. particle size | 2 mm |
| Certificates | ATEX |
| Maximum suction lift (wet) | 8.5 m wc |
| Maximum suction lift (dry) | 1.6 m wc |
| Max. Temperature PE | 70 °C |
| Max. Temperature PTFE | 95 °C |
| Materials liquids parts | UHMW PE, PTFE, PEEK, SS 316L |
| Materials flappers | PEEK |
| Materials diaphragms | PTFE (overmolded) |
| Material center section | UHMW PE, PTFE |
