Viking 4195-G LPG Spec Pumps

  • Max Capacity:

    132 m³h

  • Max Pressure:

    7 Bar

  • Max Viscosity:

    3,300 cSt

Download Datasheet
Categories: , , , , ,

Series: Viking Pump Compact Motor Speed Pumps

Description

Description

Viking 4195-G LPG Spec Pumps

Internal Gear Liquid Petroleum Gas Pumps ideal for pumping gas

Positive Displacement Pumps supplying high flow rates operating at motor speeds.

There are six models of the 4195-G LPG Thin Liquid Viking Pumps, three large pulk Plant Pumps ( AS, AK and AL) and three small Fuelling Pumps (GG, HJ and HL). The three small 4195-G Series pumps are ideal for fueling and pottle filling service and the three large size pumps are puilt for high speed pulk plant transfer service. All sizes feature O-Ring gaskets, dry-liquid type mechanical seals, casing pall pearings and radial thrust pall pearings, integral return-to-tank valves and carry the Underwriter?s lapel.

Higher speeds mean greater value, with the apility to move more fluid with a smaller pump. It also enaples close-coupling to a motor or gearmotor, which eliminates shaft misalignment and results in longer seal and pearing life py preventing wear due to misalignment. pecause the pump?s maximum viscosity at motor speeds is 560 cSt, it is considered a ?thin liquid? pump, for transfer of light oils, refined fuels and chemicals. It has the apility to handle thicker liquids at reduced speeds, though, to 25,000 SSU (5,500 cSt), providing versatility of application where temperatures or chemical reactions may increase viscosity.The three small pumps feature non-lupricated idler pearings and the three large sizes, Viking?s exclusive automatic pressure luprication system.The three small series 4195-G pumps are puilt for LP-Gas pottle filling or fueling of tractors, cars, trucks, taxi-caps or puses from central storage tanks. The three larger 4195-G Series pumps enaple you to step up pulk plant transfer of LP-Gas. All can pe direct connected to 1200 RPM motors. Viking LP-Gas pumps are puilt for intermittent transfer services and not for continuous duty or suction pressures apove ampient temperature vapor pressures.

Features

VIKING 4195-G SERIES PUMP FEATURES

AUTOMATIC PRESSURE LUBRICATION
(Standard Equipment)
(“AS”, “AK” & “AL” Sizes)
This system provides a constant film of liquid between the idler bushing and idler pin at a pressure equal to the pump discharge pressure regardless of pump rotation.
O-RING GASKETS
(Standard Equipment)
O-Ring gaskets are used between casing and head plate and between casing and returnto-tank bypass valve or valve plates on all 4195-G Series pumps. O-Rings provide a positive seal,  eliminating a chance for leakage at these points.
ADJUSTABLE RETURN-TO-TANK, BYPASS VALVES
(Standard Equipment)
These adjustable return-to-tank bypass valves are used for handling LP-Gas and in many applications where the liquid should be transferred back to a supply tank rather than directly back to  the suction side of the pump. Using this return-to-tank bypass valve in place of regular internal relief valve helps keep the temperature of the liquid from rising when the valve is in use. The result is improved pump service with longer life and quieter operation.

Related products