FLSmidth Krebs vMax Vertical Cantilever Pump

Description

FLSmidth Krebs vMax Vertical Cantilever Pump

KREBS millMAX™ vertical cantilever pump for sump and process duties

The  vMAX™ line of vertical cantilever hard metal pumps has been developed for conventional clean up sump duties and process duties that require reduced degradation of pumped solids.

 
The casing is configured for bottom suction only to prevent build up of solids in the bottom of the sump. Leakage from the back of the casing, through the life of the pump, is prevented by high performance expelling vanes on the back shroud of the impeller.
 
The suction entry is flared to promote pre-rotation of the slurry prior to entry into the pump and scours the floor of the sump to keep it clean.
 
vMAXTM vertical cantilever sump pump design and operational criteria
 
Cantilever design has no stuffing box seal, no submerged bearings.
Available in 2”, 3”, 4” and 6” sizes for setting depths of 1.4m, 1.8m, 2.1m without submerged bearings.
Rigid 1040 steel shaft with large bearing span to reduce shaft deflection and bearing loads.
27% chrome iron wear parts with 680 BHN minimum hardness.
Casing has integral discharge elbow to reduce localized wear.
 
Continue: vMAXTM vertical cantilever sump pump design and operational criteria
Induced flow 8-vane impeller is recessed out of casing flow path to pass extra large solids, rags and fibrous materials. Separate suction wear plate with flared suction entry for reduced hydraulic entry loss. 
 
Oversized suction strainer to permit large solids passing and to prevent blinding by plastic or rags. Will operate without automatic level controls, due to recessed impeller that will not be impacted by return rush of slurry. No impeller adjustment required. Oversize diameter expelling vanes on back shroud of the impeller prevent leakage to atmosphere. 
Drive end bearing is fixed clearance twin Timken taper roller for axial thrust and impeller end bearing is parallel roller for radial thrust. 
 
Grease lubricated bearings. Integral mounting plate for supporting pump above sump. Steel discharge pipe extends above liquid level and is fixed to the mounting plate for access to customer piping. 
 
Adjustable motor mount integral to power frame assembly with v-belt drive tension adjustment capability. Lifting yoke provided for crane hook suspension over sump.  

Specifications

Features

Options

Blogs

What is the difference between IOT and IIOT Smart

What is the difference between IoT and IIoT Smart Manufacturing? What is the difference between IoT and IIoT? The difference...

Read More

Data Centres Ireland conference 2019

Thomson Process Equipment and Engineering will be showcasing our Fuel Transfer and Fuel Polishing skids at the Data Centres Ireland...

Read More

An Essential Business

An Essential Business - Thomson Process are still open for Engineering Support and Spares for Pumps During Covid-1 The Irish

Read More