HNPM mzr-2521

Download Datasheet

View In CaseStudy

Max Capacity: 9 ml/min

Max Pressure: 1.5 bar

Max Viscosity: 100 mPas

Temperature Range: -20 to +60 °C

Categories: HNP Mikrosysteme Gear Pumps, Low Pressure Series, Pumps

Description

HNPM mzr-2521 Low Pressure Micro Annular Gear Pump from HNP Mikrosysteme supplied by Thomson Process Equipment and Engineering Ltd.

HNP Mikrosysteme compact micro annular gear pump mzr-2521 Low Pressure Pump for use in Analytical Instrumentation.

HNPM mzr-2521 pump generates a low pulsation, highly precise flow featuring low shear stress. It dispenses at a high precision the lowest volumes in microliter range. Due to its compact design small dimensions have been achieved. The pump is suitable for dosage of low viscosity liquids such as deionized water, watery solutions, methanol, solvents, oil and lubricants.

Advantages of the HNPM mzr-2521 Micro Annular Gear Pump.

Compact dimensions – diameter 13 mm, length 75 mm
Small dosage volumes, high flow rates – smallest volume 0.25 µl, flow up to 9 ml/min
High dosage precision – precision CV 1 % at low volumes
Long service life – wear-resistant tungsten carbide or ceramics
Low pulsation delivery, low shear stress – rotary micro annular gear technology

Applications of the HNP Mikrosysteme HNPM mzr-2521 Micro Annular Gear Pump Low Pressure Series.

Analytical instrumentation
Fuel cells
Laboratory automation
In vitro diagnostics

Specifications

Flow rate	0.15 – 9 ml/min (min. 0.0015 ml/min *)
Viscosity range	0.3 – 100 mPas (max. 1,000 mPas *)
Precision CV	1 % (Coefficient of Variation CV)
Velocity range	100 – 6000 rpm (min. 1 rpm *)
Fluid connection	slip fittings with outside diameter 2 mm optional: manifold assembly M2.1
Wetted parts	stainless steel 316L, ceramics, tungsten carbide Ni based, epoxy resin, optional: alloy C22 (2.4602) instead of stainless steel, ceramics instead of tungsten carbide; shaft seal: graphite-reinforced PTFE, stainless steel 316L, optional: alloy C276 (2.4819) instead of stainless steel; static seals: FPM, optional: EPDM, FFPM
Motor	DC-motor with graphite brushes, assigned power rating 3 W, nominal voltage 18 V, digital magnet encoder 16 counts per turn
Dimensions (L x W x H)	Ø 13 mm, length 75 mm
Weight	approx. 50 g (manifold assembly approx. 65 g)
Electrical connection	10-pole connector
Differential pressure range	0 – 3 bar (44 psi)
Maximum inlet pressure	1 bar
Operating temperature range	-20 … +60 °C
Displacement volume	1.5 µl
Smallest dosage volume	0.25 µl
Remark	* depending on accessories, Customized solutions on request

Even if single parameters are within the indicated performance range of technical data, certain parameter combinations may not be achievable. Single parameters may exceed their indicated performance range under adequate circumstances. For detailed evaluation please contact HNP Mikrosysteme's agent in Ireland, Thomson Process Equipment and Engineering Ltd. Actual performance may vary.
Specifications are subject to change without notice.

Features

Options

HNPM mzr-2521 Low Pressure Pump Accessories

Reduction gear

reduction gear unit,

reduces pump speed,

stabilizes motor speed in low RPM-range, increases drive torque

Programmable controller S-ND

for micro annular gear pumps from the low pressure series and mzr-xx42,

programmable controller for continuous and discrete dosing

Controller S-KG

for micro annular gear pumps from the low pressure series and mzr-xx42,

4-Q-DC controller for continuous dosing

Blogs

Why Pumps Matter In Water Treatment

Understanding Water Treatment Pumps Water treatment processes differ significantly from simple filtration systems to complex industrial wastewater treatment. Each process’s...

Asphalt and Bitumen Pumps for Making Road Surfaces and Roof Pitch – Based in Ireland

We make pumping systems for Asphalt / Bitumen. They come from Ireland, so there are no customs forms to deal...

How To Pump Molasses in the Winter

Pumping Molasses in the Winter What is the best way to pump molasses when the weather is cold, and the...