Blagdon B15 Non-Metallic Diaphragm Pump

  • Max. Capacity 48 l/min

  • Max. Pressure 8 bar

  • Max. Viscosity 5,000 cP

  • Temperature Range Limited by elastomers - Up to 180 deg C.

Blagdon B15 Non-Metallic Diaphragm Pump

Blagdon Air Operated Diaphragm Pump Non-Metallic Diaphragm Pumps B15 Pumps. 

Excellent for pumping glues, acids, corrosive liquids, low duty applications. Very Lightweight and handy pump for a wide variety of applications. 

Needs compressed air to operate. 

Up to 48 l/min

1/2" Air Operated Diaphragm Pump

Non-Metallic Construction 

Blagdon Air-Operated Double Diaphragm (AODD) Pumps provide high performance, reliable solutions for your pumping needs. They specialise in extreme condition environments and applications...keeping your process moving both above and below ground. Their AODD pumps have long been recognised as the "workhorse" of the industry for handling difficult liquids at relatively low pressures and flows. The range of applications is virtually limitless!

The pump chambers are alternately filled and emptied by drawing fluid in through a common (suction) inlet, and out through a common (discharge) outlet. The diaphragms in each chamber are linked by a common shaft so that they move backwards and forwards in unison. Compressed air is directed by the air valve alternatively, behind each diaphragm, to power discharge strokes. Pump speed, fluid output and pressure (or head) is controlled by increasing or decreasing the flow of compressed air to the pump.

Common applications:
  • For corrosive liquids and chemicals
  • When metallic contact is not acceptable
  • Low cost, straight forward construction
  • When electrical power is not available
  • Noise sensitive areas


Pump type: Air Operated Double Diaphragm Pump
Control: Valve in air inlet (not included) 
Materials: Non-metallic casing (see options)
Fluid Connections: 1/2" (see options)
Max Solid diameter: 2mm
Max Flow rate: 48 litre/min
Max Discharge pressure: 8 bar
Air Inlet: 1/4" BSP (F) or NPT (F)
Pump weight: see options


  • Simple construction, easy to maintain & control
  • Self-priming, ideal for emptying containers
  • ATEX approved as option - intrinsically safe
  • Low break-out pressure
  • Reliable, proven pneumatic air valve
  • Strong, robust design
  • Manufactured in Shannon, Ireland


Casing materials: Polypropylene, Conductive polypropylene, PVDF
Construction Materials: Polypropylene/Aluminium (5.3kg), PVDF/Aluminium (7.0kg), Polypropylene/Stainless Stee (12kg), PVDF/Stainless Steel (13.5kg)

Internal material options: Nitrile, EPDM, Neoprene, Santoprene, PTFE, Viton (FKM), Polypropylene
Fluid Connection options: 1/2" ANSI #150 or DN15 DIN Compatible Flanges

Like all air operated diaphragm pumps, this pump requires a compressed air source to function.
Need a compressor and pump combo? Check out the compressors in the "Other Products" menu tab.