Even if single parameters are within the indicated performance range of technical data, certain parameter combinations may not be achievable. Single parameters may exceed their indicated performance range under adequate circumstances. For detailed evaluation please contact HNP Mikrosysteme Irish Agent, Thomson Process Equipment and Engineering. Actual performance may vary.
Specifications are subject to change without notice.
|
Ambient temperature range |
-20 ... +40 °C (-55 ... +60 °C *) |
|
Flow rate |
58 – 1152 ml/min (29 - 576 ml/min *) |
|
Viscosity range |
0.3 – 5,000 mPas (10,000 mPas *) |
|
Precision CV |
< 1 % (Coefficient of variation CV) |
|
Velocity range |
300 – 6000 rpm (150 – 3000 rpm *) |
|
Fluid connection |
3/8" NPT internal thread, lateral optional 3/8" NPT internal thread, frontal |
|
Wetted parts |
stainless steel 316L (1.4435), tungsten carbide Ni-based; shaft seal: graphite-reinforced PTFE, alloy C276 (2.4819); static seals: FPM, optional: EPDM, FFPM |
|
Motor |
three-phase AC motor, IEC-Size 063, 2 poles, IP 55, rated voltage 240/400 V, frequency 50 Hz, 250 W |
|
Dimensions (L x W x H) |
358 x 120 x 224 mm |
|
Weight |
approx. 22 kg |
|
Temperature protection |
PTC-resistor, 6 pieces |
|
Ex-certification |
CE II 2G c T4 X |
|
Place of installation |
Ex area zone 1, 2 |
|
Differential pressure range |
0 - 80 bar (1,160 psi) |
|
Maximum inlet pressure |
10 bar |
|
Operating temperature range |
-5 ... +40 °C (-20 ... +120 °C *) |
|
Displacement volume |
192 µl |
|
Smallest dosage volume |
100 µl |
|
Remark |
* depending on accessories, |
