HNPM mzr-7208
-
Max. Capacity 288 ml/min
-
Max. Pressure 150 bar
-
Max. Viscosity 1,000,000 mPas
-
Temperature Range -20 to +150 °C

HNPM mzr-7208 Micro Annular Gear Pump
The micro annular gear pump mzr-7208 covers the flow rate range 0.048-288 ml/min. To the main assets of the device belong high precision, low pulsation, low volume dosage even of non-lubricating liquids or at high pressures. Driven by a high-power DC-servomotor the pump allows dosage in a broad viscosity range and shows small, economic dimensions. The mzr-7208 targets applications in industrial production and process technology. The pump has been designed for continuous delivery and discrete dosage of water, watery solutions, solvents, methanol, oil, lubricants, adhesives, inks and paints as well as other high viscosity liquids.
Advantages of the Micro Annular Gear Pump
- High dosage precision
- precision CV < 1% at low volumes
- High differential pressures
- achievable even for low viscosity liquids
- Long service life
- wear-resistant tungsten carbide
- Broad viscosity range
- methanol, water, solvents, adhesives, grease, gel
- Compact measurements
- length 211 mm
- Dynamic precision motor
- brushless DC-motor with encoder
- Low pulsation delivery, low shear stress
- rotary micro annular gear technology
Applications using Micro Annular Gear Pumps
- Chemical processing
- Industrial and plant engineering
- Packaging
- Medical and pharmaceutical industry
- Mini plant technology
- Spraying
- Dispensing of adhesives
- Ink and paint dosage
- Vacuum applications
Specifications
Flow rate | 0.048 – 288 ml/min |
Viscosity range | 0.3 – 50,000 mPas (max. 1,000,000 mPas) |
Precision CV | < 1 % (Coefficient of variation CV) |
Velocity range | 1 – 6000 rpm |
Fluid connection | 1/8" NPT internal thread, lateral optional: 1/8" NPT internal thread, frontal |
Wetted parts | stainless steel 316L (1.4404, 1.4435), tungsten carbide Ni-based; shaft seal: graphite-reinforced PTFE, 316L static seals: FPM, optional: EPDM, FFPM |
Motor | brushless DC-servomotor, IP 54, winding 36 V DC, output power 201 W, max. continuous torque 192 mNm |
Dimensions (L x W x H) | 211 x 84 x 93 mm |
Weight | approx. 1500 g |
Encoder | 500 counts per turn, type HEDL 5640 |
Differential pressure range | 0 – 30 bar (1 mPas); 0 – 150 bar (above 16 mPas) |
Maximum inlet pressure | 5 bar (73 psi), (10 – 40 bar (580 psi) *) |
Operating temperature range | -5 ... +60 °C (-20 ... +150 °C *) |
Displacement volume | 48 µl |
Smallest dosage volume | 30 µl |
Remark |
* depending on accessories, Customized solutions on request |
Options
Available Accessories for the Micro Annular Gear Pump
Heat insulation module

thermal insulation of pump head and drive for high performance and hermetic inert pump series,
also available in ATEX
also available in ATEX
Fluidic seal module

additional sealing system for handling liquids sensitive to air or moisture and for vacuum applications of pumps from the high performance series
Electrical heating module

additional electrical heating for pump heads from the high performance and hermetic inert series with frontal fluid connection,
thermal insulation of pump head and drive,
prevents temperature drop of liquid
thermal insulation of pump head and drive,
prevents temperature drop of liquid
Double shell heating module

double shell for active heating or cooling of pump heads from the high performance and hermetic inert series,
thermal insulation of pump head and drive,
prevents temperature drop of liquid
thermal insulation of pump head and drive,
prevents temperature drop of liquid