HNPM S-ND

HNPM S-ND

HNPM S-ND Programmable Controller for discrete and continuous delivery

Windows compatible dosing controller that is capable of saving dosing information to memory.

 
The controller S-ND is recommended for programmable, precise control of discrete dosage and continuous delivery tasks in combination with pumps mzr-2521, mzr-2921, mzr-4622, mzr-2542 and mzr-2942. The 16-bit microcontroller allows speed and position control for highly accurate dosage. The compact design on a PCB enables flexible installation. Process control link can be established via a RS-232 interface. Motor speed or  flow rate can be set either by an analog input (0 10 V) or a potentiometer mounted on the PCB. There are three digital inputs, one of them is equipped with a switch. Programs for dosage can be saved in the memory.
 

Advantages of HNP S-ND Programmable controller for micro annualar gear pumps. 

  • High quality pump controller for continuous and discrete delivery

  • Powerful 16-bit microcontroller

  • Programming of controller

  • Windows®-based software »Motion Manager«

  • Potentiometer for speed set

  • Analog input 0-10 V

  • 3 digital inputs, 1 input is equipped with a switch

  • 1 digital output, optionally programmable as input

  • Two colored LED status indicator

  • EEPROM memory

  • RS-232 interface

Specifications

Velocity range 1 – 6000 rpm
Dimensions (L x W x H) approx. 112 x 84 x 36 mm
Digital inputs # 3, 4, 5 low 0...0.5 V / high 4...30 V
input # 3 with switch
Weight approx. 170 g
Input # 1 (speed) 0–10 V
Voltage DIN 45323 socket, screw terminal
Serial interface RS-232, SUB-D plug, 9-pole
Protection class IP 20
Control PI controller, speed and position control
Supply voltage 24 V DC (12 – 30 V)
Pump connector pin headers, 10-pole
Error output (input # 2) Open collector max. UB / 30 mA
no error: connected to GND
as input: low 0...0.5 V / high 4 V...UB
Memory 6600 bytes
Remark subject to technical changes