HNPM mzr-11508X1

  • Max. Capacity 1152 ml/min

  • Max. Pressure 30 bar

  • Max. Viscosity 100000 mPas

  • Temperature Range -5 to +120 °C 

HNPM mzr-11508X1

High Performance Series Micro Annular Gear Pump HNPM mzr-11508X1

Excellent Precision Dosing, Long Service Life and Wear Resistant. 

The micro annular gear pump mzr-11508X1 is equipped with tungsten carbide rotors and bear-ings. Hard construction material and precision manufacturing techniques guarantee excellent dosage precision, high service life and wear resistance for low volume dosage of non-lubricating liquids. Driven by a high-power DC-motor the pump has a compact design and covers the flow range from 0.19 ml/min to 1152 ml/min. The mzr-11508X1 is suitable for continuous delivery and discrete dosage of high viscosity liquids. It achieves high differential pressures and provides a low pulsation flow. Its robustness and the available accessories make it suitable for challenging applications.
 
 

Advantages of high dosage precision pump HNPM Mzr-11508X1

  • High dosage precision - precision CV < 1% at low volumes
  • Long service life - wear-resistant tungsten carbide
  • Broad viscosity range - methanol, water, solvents, adhesives, grease, gel
  • Dynamic precision motor -  brushless DC-motor with encoder
  • Compact measurements - length 265 mm
  • High differential pressures - achievable even for low viscosity liquids
  • Low pulsation delivery, low shear stress - rotary micro annular gear technology

Applications

  • Chemical processing
  • Industrial and plant engineering
  • Packaging
  • Medical and pharmaceutical industry
  • Mini plant technology
  • Spraying
  • Dispensing of adhesives
  • Ink and paint dosage
  • Vacuum applications

Specifications

Flow rate 0.19 – 1152 ml/min
Viscosity range 0.3 – 50,000 mPas (max. 100,000 mPas)
Precision CV < 1 % (Coefficient of variation CV)
Velocity range 1 – 6000 rpm
Fluid connection 3/8" NPT internal thread, lateral optional 3/8" NPT internal thread, frontal
Wetted parts stainless steel 316L (1.4435), tungsten carbide Ni-based; shaft seal: graphite-reinforced PTFE, alloy C276 (2.4819); static seals: FPM, optional: EPDM, FFPM
Motor brushless DC-servomotor, IP 54, winding 36 V DC, output power 201 W, max. continuous torque 192 mNm
Interface motor cable length 2 m, 6-pole plug for motor winding, 12-pole plug for encoder and hall sensors
Dimensions (L x W x H) 265 x 100 x 109 mm
Weight approx. 4.5 kg
Encoder 1000 counts per turn, analog hall sensors
Differential pressure range 0 – 30 bar
Maximum inlet pressure 10 bar
Operating temperature range -5 ... +60 °C (-20 ... +120 °C *)
Displacement volume 192 µl
Smallest dosage volume 100 µl
Remark * with optional heat insulation or heating module,
Customized solutions on request

Even if single parameters are within the indicated performance range of technical data, certain parameter combinations may not be achievable. Single parameters may exceed their indicated performance range under adequate circumstances. For detailed evaluation please contact Thomson Process Equipment and Engineering. Actual performance may vary.
Specifications are subject to change without notice.

Options

Accessories

Reduction gear

reduction gear unit,
reduces pump speed,
stabilizes motor speed in low RPM-range, increases drive torque
 

Programmable controller S-BL

for pumps with brushless DC-motor,
programmable controller for continuous and discrete dosing
 

Heat insulation module

thermal insulation of pump head and drive for high performance and hermetic inert pump series, 
also available in ATEX
 

Fluidic seal module

additional sealing system for handling liquids sensitive to air or moisture and for vacuum applications of pumps from the high performance series
 

Electrical heating module

additional electrical heating for pump heads from the high performance and hermetic inert series with frontal fluid connection,
thermal insulation of pump head and drive,
prevents temperature drop of liquid
 

Double shell heating module

double shell for active heating or cooling of pump heads from the high performance and hermetic inert series,
thermal insulation of pump head and drive,
prevents temperature drop of liquid