Advanced Filter
- Industry Wise
- Brand Wise
- Category Wise
Click for more details
32 Series Packed
Viking Pump General Purpose Pumps Positive Displacement Pumps Internal Gear Pumps Economical and Efficient for Medium-Duty Applications 32 Series Packed Seal.
The Viking Pump 32 Series General Purpose Pumps, with Packed shaft Seal.
The Viking Pump General Purpose Pumps use a floating rotor deisgn in which the rotor or shaft is allowed to 'float' within the pump head. These pumps are well suited for medium duty applications and is a good metering pump.
The Viking Pump General Purpose series internal gear pumps offer economical and efficient design for medium-duty applications. They utilize a "floating rotor" design, in which the rotor/shaft is not retained by a thrust bearing, and is allowed to "float" within the pump head. This reduces the available pressure and allowable viscosity compared to a thrust bearing design like the Universal Seal or Heavy Duty series, but is well suited to many medium duty applications. Can also be used as a metering pump. Accepts various sealing options including: packing, component mechanical seals, and lip seals.Viking General Purpose Series 32 pumps are extremely well suited for light, medium and intermittent service handling a variety of liquids. The smaller sizes “C”, “F” and “FH” are constructed for heavier duty service. Mechanical seal equipped General Purpose pump models in sizes from “C” thru “HL” shown in this section are available with Underwriters label for handling fuel oil. Model numbers for these pumps must be designated by a suffix -X. “UL” listed models can be equipped with integral relief valve.
Viking’s unique and unusually simple pump construction makes it adaptable to many diversified installations. The pumps possess excellent vacuum characteristics and will operate and prime at suction lifts up to 25 feet, depending upon the vaporization point of volatile liquids. Because of the cushioned action in providing a continuous and steady stream of liquid without splashing, pounding, foaming or churning, the Viking pump is adaptable to an unlimited number of industrial applications. All sizes of Viking General Purpose pumps have tapped ports except “LQ”, “LL”, “Q”, “M” and “N” sizes. These haveflanged ports ready to accept companion flanges. “K” through “N” sizes are furnished with conventional packing as standard. A cartridge style triple lip sealing option is available for the “K” through “N” sizes. A supporting anti-friction bearing pillow block is recommended for the end of the pump shaft on all V-belt driven units.
-
32 Series Packed
Viking 32 Cast Iron
Viking 32 Cast Iron
Viking Series 32 Positive Displacement Pumps Ireland Mechanical Seal Equipped pump mode
More Info