Contact me at: +353 1 2750801
Download Brochure Request a call back

Viking 32 Cast Iron

  • Max. Capacity to 102 m3/h

  • Max. Pressure 17 BAR for 21 cSt & above

  • Max. Viscosity 1 to 55,000 cSt

  • Temperature Range -51 to +232

Viking 32 Cast Iron

Viking Series 32 Positive Displacement Pumps Ireland 

Mechanical Seal Equipped pump models in various sizes. 

Viking Series 32 pumps are ideal for light, medium and intermittent service handling of a variety of liquids.

 
Viking Pump Series 32 Internal Gear Pump are ideal for light duty. The mechanical seal equipped pump comes in various sizes. The smaller sizes “C”, “F” and “FH” are constructed for heavier duty service. Mechanical seal equipped pump models in sizes from “C” to “HL”  are available with Underwriters label for handling fuel oil. 
 
Viking Pump's unique and unusually simple pump construction makes it adaptable to many diversified installations. The pumps possess excellent vacuum characteristics and will operate and prime at suction lifts up to 7.62 metres, depending upon the vaporization point of volatile liquids. Because of the cushioned action in providing a continuous and steady stream of liquid without splashing, pounding, foaming or churning, the Viking pump is adaptable to an unlimited number of industrial applications.
Enquiry Download Datasheet (Click to View)

Specifications

Viking Pump Series 32 Pump Specifications

Relief Valve on Casing or Head

The integral pressure relief valve on casing or head permits by-passing of liquid from discharge back to suction side of pump. Reverse valve when reversing pump rotation on large pumps. Small pumps with relief valve built with right hand suction as standard.

Steam Jacketed Head

Jacketed head or plate permits temperature control of the liq uid being pumped. Jacketed plate available on “G” through “LL” size pumps. Jacketed head available on “Q” through “N” sizes. Relief valve not available with jacketed head or plate.

Upright, Opposite & Right Angle Ports

“C”, “F” and “FH” size pumps furnished with upright port casings: “G” size pump with opposite port casing and “H” through “N” size pumps with right angle port casings. Right hand port determined by lo-cation of side port when facing pump from shaft end.
 

Mechanical Seal

“G”, “H” and “HL” sizes illustrated. All 32/432 Series pumps are available with packed stuff­ing boxes. Mechanical seals are available on “C” through “HL” size pumps as standard. The seal is a rotary type packaged unit that is simple and self-adjusting. It works WITH rather than against pressure.

Features

Model Standard Port Size Nominal Pump Rating GPM Nominal Pump Rating m3/h Maximum RPM Maximum Pressure PSI Maximum Pressure BAR
C32 0.25 0.5 0.11 1800 250 17
F32 0.5 1.5 0.34 1800 250 17
FH32 0.5 3 0.68 1800 250 17
G32 1 5 1.1 1200 100 7
H32 1 10 2.3 1200 100 7
HL32 1.5 20 4.5 1200 100 7
K32 1.5 35 8 420 100 7
KK32 2 50 11 420 100 7
L32 2 90 20 420 100 7
LQ32 2.5 90 20 420 100 7
LL32 3 140 32 520 100 7
Q32 3 200 45 350 75 5
M32 4 280 63 280 75 5
N32 5 450 102 280 75 5

Options

All sizes of Viking 32/432 Series pumps have tapped ports except “LQ”, “LL”, “Q”, “M” and “N” sizes. These have flanged ports ready to accept companion flanges.

“K” through “N” sizes are furnished with conventional  packing as standard. A cartridge style triple lip sealing option is available for the “K” through “N” sizes
 
A supporting anti-friction bearing pillow block is recommended for the end of the pump shaft on all V-belt driven units.