Standard Pump Drum Pump Motor 12V and 24V by Thomson Process

Standard Pump Drum Pump Motor SP-440EX Explosion Proof Motor

Standard Pump motors are designed to operate in the most demanding of environments. An extensive line of Explosion Proof, TEFC, Open Drip-Proof, and Air motors provide durability and safety regardless of the environment.

The Standard Pump Industrial Explosion Proof Drum Pump Motor Series SP-440 EX is engineered for transferring flammable /combustible liquids and meets the stringent safety requirements of the Chemical Processing Industry.

This product is currently out of stock and unavailable.

Description

Standard Pump motors are designed to operate in the most demanding of environments. An extensive line of Explosion Proof, TEFC, Open Drip-Proof, and Air motors provide durability and safety regardless of the environment.

The Standard Pump Industrial Explosion Proof Drum Pump Motor Series SP-440 EX is engineered for transferring flammable /combustible liquids and meets the stringent safety requirements of the Chemical Processing Industry.

 

The Pump can be supplied with battery plugs upon request.

Pumping of flammable or combustible liquids can generate a static electric discharge, causing fire or explosion resulting in injury or death. Read and understand operating instructions before starting this unit. Follow all federal, state and local safety codes including NFPA 30 – NFPA77. Prior to connecting to air supply, install bond and ground wires and check continuity of each wire. A meter reading of one ohm or less is required for safe liquid transfer. Use only approved metallic pump tube, explosion proof or air motor, metallic drum and receiving vessel when pumping flammables. Air motors are not recognized under any current Underwriter’s Laboratory listing program. Consult a qualified engineer for suitability for use in a hazardous area or on flammables.

Additional information

Motor Enclosure

Specifications

The Standard Pump Industrial Explosion Proof Drum Pump Motor Series SP-440 EX is engineered for transferring flammable /combustible liquids and meets the stringent safety requirements of the Chemical Processing Industry.

 

115V

Technical Specifications
Enclosure: ……………………………………………………..……….………………..Explosion Proof (IP55)
Available Voltage: ………………………………………………………..………………..SP-430EX : 115V
Horsepower (Watts):…………………………………………………………………………………1.3 (1000)
Phase:…………………………………………………………………………………………………………..…….1
Amps:……………………………………..………………………………………...4.2-9.1 (varies by voltage)
Frequency: …..……………………………………………………………………………………….….50-60 Hz
………………………………………………………………………
SP-440EX : Atex II 2G Ex db ib IIB T5 Gb
Housing Material:.…..………………..……….……Aluminum (Inner Housing) / Nylon (Outer Shell)
Power Cord Length:………………………….…………………………………………….…….12 ft. (3,7 m)
Power Cord Plug:……………….……………….………………………………………………..Not Provided
Noise Level:…………………………………………………………………………………………………82 dBa
Thermal Overload:……………………………………………………………………………………………..Yes
Variable Speed:…………………..…………………………………………………………………………….Yes
Drum Pump Motors | SP-430/440 Series
Weight:………….…………….……….……………...……………………………………..…..15 lbs (6,8 kg)

…………………………………………………………………………………………………....SP-440EX : 230V
RPM (min-max):…………………..……………………………………………………………………0-12,00
WARNING: Pumping of flammables or combustible liquids can generate a static electric discharge, causing fire or explosion resulting in injury or death. Read and understand operating

instructions before starting this unit. Follow all federal, state and local safety codes including NFPA 30 – NFPA77. Prior to connecting to air supply, install bond and ground wires and check
continuity of each wire. A meter reading of one ohm or less is required for safe liquid transfer. Use only metallic drum, receiving vessel and metallic pump when pumping flammables.
Air motors are not recognized under any current Underwriter’s Laboratory listing program. Consult a qualified engineer for suitability for use in a hazardous area or on flammables.
NOTE: Explosion proof motor regulations require that motors be returned to the manufacturer for repair.

Features

The 12V/ 24VF Series of pumps have an open drip-proof IP44 Enclosure and are powered by either a 12V or 24V DC plug and require 150 Watts.

These models of Standard Pump Drum Pump Motors weigh 2.3KG and are compatible with non atex pumps as they are not are not suitable for pumping flammable or combustible liquids

Options

The Pump can be supplied with battery plugs upon request.

Blogs

Sterilobe Series by Viking Pump Hygienic

Sterilobe Series by Viking Pump Hygienic at the National Manufacturing & Supply Chain Conference & Exhibition 2024 Innovative Solutions by...

Read More

HNPM Micro Annular Gear Pump

At the National Manufacturing & Supply Chain Conference & Exhibition 2024 Innovative Solutions by Thomson Process Equipment & Engineering Ltd....

Read More

Why Pumps Matter In Water Treatment

Understanding Water Treatment Pumps Water treatment processes differ significantly from simple filtration systems to complex industrial wastewater treatment. Each process’s...

Read More