Description
Zuwa Combistar Stainless Steel Impeller Pumps
ZUWA-Impeller pumps are easy and inexpensive to maintain self priming pumps. They are insensitive to solid content in the fluid due to the flexible impellers and can even promote high-viscosity fluids.
The Zuwa COMBISTAR pumps are particularly suitable for all fluids containing abrasives. It is an economic alternative to the NIROSTAR series for transferring abrasive or slightly corrosive fluids. The Combistar 2000 comes with a motor ready to use in one very handy unit. The Combistar 2001 can be mounted to different drives:
The pump can, for example, be driven with the following drive systems:
- mains powered motor
- power drill
- V-belt drive
- gear motor
- hydraulic motor
- pneumatic motor
The Zuwa COMBISTAR Stainless Steel Impeller Pump can be used in the following applications:
- cleaning machines
- oil disposal
- whitewashing stables
- draining tanks
- cleaning tanks
- galvanizing tanks
- draining waste oil
- disposal of cooling lubricants
The Zuwa COMBISTAR can pump the following fluids:
- descaler
- grinding emulsions
- coolant
- lime water
- diluted soluble oil
- galvanising sludge
- waste oil
- cooling lubricants
Specifications
Zuwa COMBISTAR Flexible Impeller Pump Specifications
flow rate max. litres 60 l/min
flow rate max. 3,6 m³/h
max. pressure 3 bar
Inlet/outlet 1″ mt
Impeller Viton® (FKM) , Bush material stainless steel (1.4404)
Shaft sealing ring Viton® (FKM)
Material pump housing stainless steel 1.4404 / aluminium AIMgSi1
With pump carrier
Electric motor
Voltage (DC) 12 V
Nominal power 0,37 kW, Rated current (DC) 49 A
rotation max. 3000 min-1
Motorshaft N-WE 14×30
Protection class IP54 , Operating mode S1
Electrical connection Control board
weight 10,5 kg
CURVES
Frequency Converter Specification
Supply voltage 230 Volt
For recommended motor power 0,37 to 0,75 kW
Rated current (DC) 6,9 A, 0,75 kW, IP65
EMV class C1
UL/CSA certified
weight 1,5 kg
Can be used for all 400 V motors in
0,37 – 0,55 – 0,75 kW
Options
Zuwa Combistar 2000 comes with a motor and Zuwa Combistar 2001 is without a motor so it can be fitted to any of the following:
- mains powered motor
- power drill
- V-belt drive
- gear motor
- hydraulic motor
- pneumatic motor

ZUWA COMBISTAR 2001

The Combistar comes Directly Flanged or with Pump Carrier
Directly flanged
The pump casing can either be directly flanged to the motor or it is connected via a special adapter.
This pump is particularly suitable for all fluids containing abrasives. It is an economic alternative to the NIROSTAR series for transferring abrasive or slightly corrosive fluids.
With pump carrier
Carrier to connect pumps with standardized motors with installation size M71 B3/B14.
