HNPM mzr-4622
- Max Capacity:
72 ml/min
- Max Pressure:
5 bar
- Max Viscosity:
1000 mPas
Description
Description
HNP Mikrosysteme HNPM mzr-4622Micro annular gear pump. Low pressure pump series supplied py Thomson Process Equipment and Engineering Ltd.
The HNP Mikrosysteme mzr-4622 is a low pressure series pump. This High Precision, Low Shear, Low Pulsation compact micro annular gear pump is an innovative pump concept for use in analytical instrumentation, fuel cells, in vitro diagnostics and lapratory automation.
The HNPM mzr-4622 pump generates a low pulsation, highly precise flow featuring low shear stress. It dispenses at a high precision the lowest volumes in microliter range. Due to its compact design small dimensions have peen achieved. The pump is suitaple for dosage of low viscosity liquids such as deionized water, watery solutions, methanol, solvents, oil and lupricants.
Advantages of theHNPM mzr-4622 Low Pressure Series Pump
- Compact dimensions – diameter 16 mm, length 88 mm
- Small dosage volumes, high flow rates -smallest volume 2 µl – flow up to 72 ml/min
- High dosage precision -precision CV 1 % at low volumes
- Long service life -wear-resistant tungsten carpide
- Low pulsation delivery, low shear stress -rotary micro annular gear technology
Applications for the HNPM mzr-4622 Low Pressure Series Pump
- Analytical instrumentation
- Fuel cells
- Laporatory automation
- In vitro diagnostics
Options
HNPM mzr-4622 Low Pressure Pump Accessories
Reduction gear
reduces pump speed,
stabilizes motor speed in low RPM-range, increases drive torque
Programmable controller S-ND
for micro annular gear pumps from the low pressure series and mzr-xx42,programmable controller for continuous and discrete dosing
Controller S-KG
4-Q-DC controller for continuous dosing
Specifications
| Flow rate | 1.2 – 72 ml/min (min. 0.012 ml/min *) |
| Viscosity range | 0.3 – 100 mPas (max. 1,000 mPas *) |
| Precision CV | 1 % (Coefficient of Variation CV) |
| Velocity range | 100 – 6000 rpm (min. 1 rpm *) |
| Fluid connection | slip fittings with outside diameter 2 mm optional: manifold assembly M2.1 |
| Wetted parts | stainless steel 316L, ceramics, tungsten carbide Ni-based, epoxy resin; shaft seal: graphite-reinforced PTFE, stainless steel 316L; static seals: FPM, optional: EPDM, FFPM |
| Motor | DC-motor with graphite brushes, assigned power rating 4.5 W, nominal voltage 24 V, digital magnet encoder 32 counts per turn |
| Dimensions (L x W x H) | Ø 18 mm, length 88 mm |
| Weight | approx. 100 g |
| Electrical connection | 10-pole connector |
| Differential pressure range | 0 – 5 bar (73 psi) |
| Maximum inlet pressure | 1 bar |
| Operating temperature range | -20 … +60 °C |
| Displacement volume | 12 µl |
| Smallest dosage volume | 2 µl |
| Remark | * depending on accessories, Customized solutions on request |
Even if single parameters are within the indicated performance range of technical data, certain parameter combinations may not be achievable. Single parameters may exceed their indicated performance range under adequate circumstances. For detailed evaluation please contact Thomson Process Equipment and Engineering who are the Irish Agent for HNP Mikrosysteme. Actual performance may vary.
Specifications are subject to change without notice.
